.png)
aecfilterparts
เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089
เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089
Your shopping cart
ไม่มีสินค้าในตะกร้าของคุณ
optibelt ALPHA SRP
เพิ่มเมื่อ: 2016-09-15 15:16:52.0
แก้ไขล่าสุด: 2016-09-16 16:44:59.0
เบอร์โทรติดต่อ: เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089 
อีเมลล์: aecfilterparts@gmail.com
รายละเอียด:
Timing belt - endless casting, with cams and coatings
Timing belt - endless casting, with cams and coatings
- ProfileThe ALPHA SRP moulds are based on those of the ALPHA TORQUE and ALPHA POWER timing belts.
- DimensionsDisplacement casting: 120 to 2,250 mm Centrifugal casting: up to 900 mm
- DetailThe optibelt SRP timing belt with cast cams and coatings is manufactured in a single production step and used in conveying systems.
The polyurethane is cast between the core mould and the special outer mould with correspondingly increased internal diameter or special outer moulds with the desired contour for the cams.
By rotating the inner and outer moulds around the central axis, a shore hardness that differs from that of the teeth can be cast using a centrifugal casting process.
- AdvantagesAdvantages
- Large number of cams within a small area
- Strong connection between cam and base belt
- Coatings with no butt joints, no binding in direction of travel
- Mould production allows small, coated belts to be manufactured
Properties- Reproducible high precision
- Strong connection between cam/coating and base belt due to consistent cross-linking
- Finely formed cam geometry thanks to liquid cast polyurethane
ไม่ระบุราคา
Profile
The ALPHA SRP moulds are based on those of the ALPHA TORQUE and ALPHA POWER timing belts.
Dimensions
Displacement casting: 120 to 2,250 mm
Centrifugal casting: up to 900 mm
Detail
The optibelt SRP timing belt with cast cams and coatings is manufactured in a single production step and used in conveying systems.
The polyurethane is cast between the core mould and the special outer mould with correspondingly increased internal diameter or special outer moulds with the desired contour for the cams.
By rotating the inner and outer moulds around the central axis, a shore hardness that differs from that of the teeth can be cast using a centrifugal casting process.
The polyurethane is cast between the core mould and the special outer mould with correspondingly increased internal diameter or special outer moulds with the desired contour for the cams.
By rotating the inner and outer moulds around the central axis, a shore hardness that differs from that of the teeth can be cast using a centrifugal casting process.
Advantages
Advantages
Large number of cams within a small area
Strong connection between cam and base belt
Coatings with no butt joints, no binding in direction of travel
Mould production allows small, coated belts to be manufactured
Properties
Reproducible high precision
Strong connection between cam/coating and base belt due to consistent cross-linking
Finely formed cam geometry thanks to liquid cast polyurethane
สินค้าที่เกี่ยวข้อง
|
