optibelt ALPHA LINEAR

จำนวนครั้งที่เปิดดูสินค้า : 826 | ความคิดเห็น: 0

optibelt ALPHA LINEAR

เพิ่มเมื่อ: 2016-09-15 14:31:14.0

แก้ไขล่าสุด: 2016-09-16 16:26:25.0

เบอร์โทรติดต่อ: เบอร์โทร : 02-171-5090 แฟกซ์ : 02-171-5089

อีเมลล์: aecfilterparts@gmail.com

รายละเอียด:
Timing belts - open-ended, extruded polyurethane

ProfileT5; T10; T20 AT5; AT10; AT20 ATL5; ATL10; ATL20 5M; 8M; 14M; 14ML XL; L; H; XH F2; F 2.5; F3; FL3
DimensionsLength on roll: 50 or 100 m

Detail
Open-ended optibelt ALPHA LINEAR timing belts are made of extruded, thermoplastic polyurethane with tension cords parallel to the edges. The belts are dimensionally stable and their precise positioning makes them ideal for use in linear drive systems.

It is also possible to apply transparent polyurethane (with a hardness of 85 Shore A), T2, yellow PU foam or other materials directly to the belt in an additional downstream extrusion process.

The optibelt ALPHA LINEAR timing belt can also be given a thin fabric covering on the tooth side in order to reduce friction and noise. Fabric can also be applied to the belt back.

AdvantagesAdvantages
High tensile strength with low elongation
High-precision positioning
ATL version timing belts for linear drives
Also available with polyamide fabric on the tooth side and/or belt back
PU also available with FDA approval for food contact
Colouring to customer’s specification on request

ไม่ระบุราคา

Profile

T5; T10; T20 AT5; AT10; AT20 ATL5; ATL10; ATL20 5M; 8M; 14M; 14ML XL; L; H; XH F2; F 2.5; F3; FL3

Dimensions

Length on roll: 50 or 100 m

Detail

Open-ended optibelt ALPHA LINEAR timing belts are made of extruded, thermoplastic polyurethane with tension cords parallel to the edges. The belts are dimensionally stable and their precise positioning makes them ideal for use in linear drive systems.

It is also possible to apply transparent polyurethane (with a hardness of 85 Shore A), T2, yellow PU foam or other materials directly to the belt in an additional downstream extrusion process.

The optibelt ALPHA LINEAR timing belt can also be given a thin fabric covering on the tooth side in order to reduce friction and noise. Fabric can also be applied to the belt back.